SmallRig Camera Cages for the Nikon Z6III Released

Camera Cage

by Jeff LochJune 18^th, 2024

SmallRig has just released three camera cages for the Nikon Z 6III: a regular cage, a “Night Eagle” higher-end version, and a cage for using the Z 6III with the optional MB-N14 grip. All cages are made of aluminum, feature three locking points to secure the camera firmly, have a built-in Arca-Swiss quick-release plate at the bottom, and have plenty of 1/4″-20 and 3/8″-16 mounting points. So, let’s take a closer look at these!

With impressive recording capabilities such as 6K60P N-RAW internal recording without any crop of the full-frame sensor, ProRes RAW HQ and ProRes 422 HQ internal recording at up to 6K30P, and 4K120P recording capabilities, there is little doubt that the Nikon Z 6III will be a popular mirrorless camera amongst filmmakers. After the camera’s release, SmallRig is one of the first third-party camera accessories manufacturers to release dedicated camera cages and accessories for it.

SmallRig cage for the Nikon Z 6III

Let’s start with the first “regular” cage for the Nikon Z 6III. This cage is a wrap-around model that weighs 170g/6oz and attaches to your camera via three mounting points: one 1/4″-20 at the bottom and two screws on the neck strap eyelets.

At the top of the cage, you’ll find one 3/8″-16 threaded hole with ARRI locating pins, six 1/4″-20 mounting points, and a built-in cold shoe. At the bottom, you’ll find a built-in Arca-Swiss plate, a 3/8″-16 and four 1/4″-20 threaded holes, a QD socket, and a slot for the included wrench.

On the right side are two strap slots and four 1/4″-20 mounting points. Lastly, the left side features a NATO rail with three 1/4″-20 and one 3/8″-16 mounting points.

SmallRig grip cage for the Nikon Z 6III

SmallRig also has a solution for using your Nikon Z 6III with the optional MB-N14 vertical grip. This bigger model is very similar to the regular cage, including the same top/bottom/right mounting points.

However, the left side differs, with another built-in Arca-Swiss quick-release plate and three 1/4″-20 mounting points. At the front of the cage, you’ll also find two 1/4″-20 threaded holes.

SmallRig “Night Eagle” cage for the Nikon Z 6III

Last, SmallRig released a “Night Eagle” version of their cage for the Z 6III. This model has gold and red accents and a vintage leather grip on the right side. This gunmetal brown cage has five 1/4″-20 and one 3/8″-16 with ARRI locating pins mounting points at the top and a relocatable cold shoe mount.

You’ll find a NATO rail on the left side with five 1/4″-20 threaded holes. The right side features three 1/4″-20 threaded holes and a strap slot.

Price and availability

The SmallRig cage for the Nikon Z 6III retails for $69.99, the “Night Eagle” version is $99.99, and the grip cage is $119.99. Several kits with a top handle and HDMI protection clamp are also available. All products are available now.

For more information, please visit SmallRig’s website here.

What do you think about these cages for the Nikon Z 6III? Did you already preordered the Z 6III? Don’t hesitate to let us know in the comments below!